MONEDJ – electric multi-turn actuator

Usage

Electric multi-turn actuator MONEDJ is designed for shifting valves and/or other elements for which they are suitable with their reversible rotary motion. Other using than that for controlling valves should be discussed with the manufacturer. The actuators can operate in circuits of remote control. The actuators can also operate in circuits of automatic regulation with the regime S4 – 25 %; 1200 h^-1.

Description

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control. The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

• Catalog
• Installation instructions

Príspevok Electric multi-turn actuator MONEDJ zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

MONJ – electric multi-turn actuator

Usage

Electric multi-turn actuator MONJ can be fitted with a position regulator, reversing contactors, overcurrent motor protection and the BAM electronic brake. They can be used to adjust control devices working in control systems, depending on the value of analogue input signal of the position regulator. They can also be equipped with reversing contactors only or with reversing contactors and the BAM electronic brake.

Description

The MODACT ® MONJ actuators have been designed for changing position of control devices by reversing rotary motion (e.g. slide valves and other devices for which they are suitable in their characteristics). A typical example of application is remote two-position or multi-position control of devices which are required to close tight in their end positions.

Documents for download

• Catalog
• Installation instructions
• Addition to installation instructions

Príspevok Electric multi-turn actuator MONJ zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

KP MINI, KP MINI EEx – electric part-turn actuator

Usage

Electric part-turn actuator KP MINI (KP MINI Control, KP MINI ЕЕх) with a constant rotating speed of the output shaft (hereafter referred to as actuators) has been specially designed for actuating valves (ball and flapper valves), louvers, air flaps and other devices for which they are in respect of their characteristics suitable. They can be used in remote and automatic control circuits.

When equipped with an electronic position regulator with position feedback, these actuators can act as a final power control element of control circuits used for controlling physical variables.

Documents for download

• Catalog
• Installation instructions

Príspevok Electric part-turn actuator KP MINI zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

MPR – electric turn with lever actuator

Usage

Electric turn with lever actuator MPR operating at a variable output speed has been specially designed for the control of actuating variables (final control elemnts of continuous and discontinuous regulating systems – flaps, louvers and valves) in industrial automation and control systems. The MODACT ^® MPR VARIANT actuators must controlled by a suitable control system.

Documents for download

• Catalog
• Installation instructions

Príspevok Electric turn with lever actuator MPR zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.