Archívy -40 to +70 [°C] - MARVEL P.I.&T. | MARVEL-BMT | Electric actuators https://marvelpit.sk/en/teplota-okolia/40-70-c-en/ Central european business company Marvel - Electric actuators, Valves Tue, 08 Jul 2025 01:09:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://marvelpit.sk/wp-content/uploads/2018/08/cropped-marvel_logo_4_1-32x32.png Archívy -40 to +70 [°C] - MARVEL P.I.&T. | MARVEL-BMT | Electric actuators https://marvelpit.sk/en/teplota-okolia/40-70-c-en/ 32 32 Electric linear actuator MTPED https://marvelpit.sk/en/product/electric-linear-actuator-mtped/ https://marvelpit.sk/en/product/electric-linear-actuator-mtped/#respond Mon, 23 May 2016 12:07:58 +0000 https://new.marvelpit.sk/produkty/mtped-linear-thrust-actuator-with-the-electronic-system-ip-67/ MTPED – electric linear actuator   Usage Electric linear actuator MTPED is used for remote two-position or three-position control of valves by reciprocating linear motion. The actuators can also be used for other devices for which they are appropriate due to their performance and parameters. Using in special cases should be discussed with the manufacturer. Description […]

Príspevok Electric linear actuator MTPED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MTPED – electric linear actuator

 

Usage

Electric linear actuator MTPED is used for remote two-position or three-position control of valves by reciprocating linear motion. The actuators can also be used for other devices for which they are appropriate due to their performance and parameters. Using in special cases should be discussed with the manufacturer.

Description

The MTPED actuators are based on MODACT MON actuator series. Moreover, they are designed with linear transmission unit for converting rotary motion into linear motion. An asynchronous motor drives, via a geared countershaft, the sun gear of a epicyclic gear unit enclosed in the supporting actuator box (power transmission). In the mechanical power control mode, the crown gear of a planet epicyclic gear unit is held in steady position by a self-locking worm gear drive. Alternatively, the handwheel, connected with the worm allows manual control to be accomplished even during motor operation without any risk of operator’s injury.

The actuator is controlled by built-in electronic circuits scanning the state of the actuator output shaft, output shaft torque, temperature of electric motor, value of supply voltage, and input signals. They are evaluated by the control program which, depending on pre-set parameters, controls output signals – state of output contact, output analog signal, control of electric motor, data communication with the superior control system.

The control elements are accessible after taking off the control box lid. For the actuators designated MTNED and for the actuators designated MTPED, the electric motors used have protective enclosures IP67. The complete actuator has the protective enclosure according to the electric motor used.

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator.

Both systems can be set and monitored by a computer with controlling programme or manually without a computer. The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control. The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

Príspevok Electric linear actuator MTPED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-linear-actuator-mtped/feed/ 0 Electric linear actuator MTNED https://marvelpit.sk/en/product/electric-linear-actuator-mtned/ https://marvelpit.sk/en/product/electric-linear-actuator-mtned/#respond Mon, 23 May 2016 12:06:36 +0000 https://new.marvelpit.sk/produkty/mtned-servomotor-primocary-tahlovy-s-elektronickym-systemem-ip-55-2/ MTNED – electric linear actuator   Usage Electric linear actuator MTNED is used for remote two-position or three-position control of valves by reciprocating linear motion. The actuators can also be used for other devices for which they are appropriate due to their performance and parameters. Using in special cases should be discussed with the manufacturer. Description […]

Príspevok Electric linear actuator MTNED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MTNED – electric linear actuator

 

Usage

Electric linear actuator MTNED is used for remote two-position or three-position control of valves by reciprocating linear motion. The actuators can also be used for other devices for which they are appropriate due to their performance and parameters. Using in special cases should be discussed with the manufacturer.

Description

The MTNED actuators are based on MODACT MON actuator series. Moreover, they are designed with linear transmission unit for converting rotary motion into linear motion. An asynchronous motor drives, via a geared countershaft, the sun gear of a epicyclic gear unit enclosed in the supporting actuator box (power transmission). In the mechanical power control mode, the crown gear of a planet epicyclic gear unit is held in steady position by a self-locking worm gear drive. Alternatively, the handwheel, connected with the worm allows manual control to be accomplished even during motor operation without any risk of operator’s injury.

The electric linear actuator MTNED is controlled by built-in electronic circuits scanning the state of the actuator output shaft, output shaft torque, temperature of electric motor, value of supply voltage, and input signals. They are evaluated by the control program which, depending on pre-set parameters, controls output signals – state of output contact, output analog signal, control of electric motor, data communication with the superior control system.

The control elements are accessible after taking off the control box lid. For the actuators designated MTNED and for the actuators designated MTPED, the electric motors used have protective enclosures IP 55. The complete actuator has the protective enclosure according to the electric motor used.

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control. The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

Príspevok Electric linear actuator MTNED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-linear-actuator-mtned/feed/ 0 Electric linear actuator MTP https://marvelpit.sk/en/product/electric-linear-actuator-mtp/ https://marvelpit.sk/en/product/electric-linear-actuator-mtp/#respond Mon, 23 May 2016 12:03:08 +0000 https://new.marvelpit.sk/produkty/mtp-servomotor-primocary-tahlovy-ip-67-2/ MTP – electric linear actuator   Usage Electric linear actuator MTP actuators are used for remote two-position or three-position control of the valves by a reverse rectilinear motion. The MODACT® MTP CONTROL actuators are fitted with an electronic position controller. In association with the valve exhibiting a suitable control characteristic, they form a position servo-loop. […]

Príspevok Electric linear actuator MTP zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MTP – electric linear actuator

 

Usage

Electric linear actuator MTP actuators are used for remote two-position or three-position control of the valves by a reverse rectilinear motion. The MODACT® MTP CONTROL actuators are fitted with an electronic position controller.

In association with the valve exhibiting a suitable control characteristic, they form a position servo-loop. The output pull-rod of these actuators is automatically brought into a position corresponding to the input signal value of the controller. The actuators can be used even for other devices for which they are in respect of their characteristics and parameters suitable. In some special cases, the contemplated use of the actuators should be consulted with the manufacturer.

Documents for download

Príspevok Electric linear actuator MTP zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-linear-actuator-mtp/feed/ 0 Electric part-turn actuator MOKED https://marvelpit.sk/en/product/electric-part-turn-actuator-moked/ https://marvelpit.sk/en/product/electric-part-turn-actuator-moked/#respond Mon, 23 May 2016 12:00:19 +0000 https://new.marvelpit.sk/produkty/moked-part-turn-actuator-for-ball-and-flap-valves-with-the-electronic-system/ MOKED – electric part-turn actuator   Usage Electric part-turn actuator MOKED is designed for shifting control elements by a reversible rotary motion with the turning angle of the output part 90°, including cases when tight closure in end positions is required. Typical example of using is control of ball and flap valves in similar installations in the regime […]

Príspevok Electric part-turn actuator MOKED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MOKED – electric part-turn actuator

 

Usage

Electric part-turn actuator MOKED is designed for shifting control elements by a reversible rotary motion with the turning angle of the output part 90°, including cases when tight closure in end positions is required. Typical example of using is control of ball and flap valves in similar installations in the regime of remote control as well as automatic regulation. The electric actuators MODACT ® MOKED are mounted directly on the controlled element.

Description

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.
The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.

The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

Príspevok Electric part-turn actuator MOKED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-part-turn-actuator-moked/feed/ 0 Electric linear actuator MTN https://marvelpit.sk/en/product/electric-linear-actuator-mtn/ https://marvelpit.sk/en/product/electric-linear-actuator-mtn/#respond Mon, 23 May 2016 12:00:15 +0000 https://new.marvelpit.sk/produkty/mtn-servomotor-primocary-tahlovy-ip-55-2/ MTN – electric linear actuator   Usage Electric linear actuator MTN can be used even for other devices for which they are in respect of their characteristics and parameters suitable. In some special cases, the contemplated use of the actuators should be consulted with the manufacturer. Description The MODACT® MTN actuators are used for remote […]

Príspevok Electric linear actuator MTN zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MTN – electric linear actuator

 

Usage

Electric linear actuator MTN can be used even for other devices for which they are in respect of their characteristics and parameters suitable. In some special cases, the contemplated use of the actuators should be consulted with the manufacturer.

Description

The MODACT® MTN actuators are used for remote two-position or three-position control of the valves by a reverse rectilinear motion. The MODACT® MTN CONTROL actuators are fitted with an electronic position controller. In association with the valve exhibiting a suitable control characteristic, they form a position servo-loop. The output pull-rod of these actuators is automatically brought into a position corresponding to the input signal value of the controller.

Documents for download

Príspevok Electric linear actuator MTN zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-linear-actuator-mtn/feed/ 0 Electric turn with lever actuator MPSPED https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsped/ https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsped/#respond Mon, 23 May 2016 11:53:24 +0000 https://new.marvelpit.sk/produkty/mpsped-servomotor-pakovy-s-konstantni-ovladaci-rychlosti-s-elektronikou-ip67-2/ MPSPED – electric turn with lever actuator   Usage Electric turn with lever actuator MPSPED is used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. Description […]

Príspevok Electric turn with lever actuator MPSPED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MPSPED – electric turn with lever actuator

 

Usage

Electric turn with lever actuator MPSPED is used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable.

Description

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.
The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

Príspevok Electric turn with lever actuator MPSPED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsped/feed/ 0 Electric turn with lever actuator MPSED https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsed/ https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsed/#respond Mon, 23 May 2016 11:52:15 +0000 https://new.marvelpit.sk/produkty/mpsed-actuator-with-a-constant-output-speed-with-the-electronic-system-ip55/ MPSED – electric turn with lever actuator   Usage Electric turn with lever actuator MPSED is used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. Description […]

Príspevok Electric turn with lever actuator MPSED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MPSED – electric turn with lever actuator

 

Usage

Electric turn with lever actuator MPSED is used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable.

Description

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.
The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.
The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

Príspevok Electric turn with lever actuator MPSED zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsed/feed/ 0 Electric turn with lever actuator MPSP https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsp/ https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsp/#respond Mon, 23 May 2016 11:51:21 +0000 https://new.marvelpit.sk/produkty/mpsp-part-turn-lever-actuator-with-a-constant-output-speed-ip67/ MPSP – electric turn with lever actuator   Usage Electric turn with lever actuator MPSP is used for remote and automatic control of flaps and louver locks, brush shifting of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. The […]

Príspevok Electric turn with lever actuator MPSP zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MPSP – electric turn with lever actuator

 

Usage

Electric turn with lever actuator MPSP is used for remote and automatic control of flaps and louver locks, brush shifting of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. The MODACT ® MPSP Control actuators are designed for use in automatic control systems employing a continuous control signal.

Documents for download

 

Príspevok Electric turn with lever actuator MPSP zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mpsp/feed/ 0 Electric turn with lever actuator MPS https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mps/ https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mps/#respond Mon, 23 May 2016 11:50:11 +0000 https://new.marvelpit.sk/produkty/mps-part-turn-lever-actuator-with-a-constant-output-speed-ip55/ MPS – electric turn with lever actuator   Usage Electric turn with lever actuator MPS is used for remote and automatic control of flaps and louver locks, brush shifting of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. […]

Príspevok Electric turn with lever actuator MPS zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]>

MPS – electric turn with lever actuator

 

Usage

Electric turn with lever actuator MPS is used for remote and automatic control of flaps and louver locks, brush shifting of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable. The MODACT ® MPS Control actuators are designed for use in automatic control systems employing a continuous control signal.

Documents for download

Príspevok Electric turn with lever actuator MPS zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

]]> https://marvelpit.sk/en/product/electric-turn-with-lever-actuator-mps/feed/ 0