SPR 2.4 PA – electric part-turn actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or torque
• Adjustable switching off-torque from 50% to 100%
• Torque blocking in limit positions
• Torque blocking during the start
• 2 freely programmable relays R1, R2 (18 functions)
• Relay READY
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA,
  or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical stop ends
• Mechanical connection – flange ISO 5211
• Manual control

Additional equipment of actuator with DMS3

• Local control for actuators with DMS3 system
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU

Documents for downloads

• General conditions
• Technical data sheet
• Installation instructions
• DMS 3 – Instraction
• Control unit – Instraction

Príspevok Electric part-turn actuator SPR 2.4 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

SPR 2.3 PA – electric part-turn actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or torque
• Adjustable switching off-torque from 50% to 100%
• Torque blocking in limit positions
• Torque blocking during the start
• 2 freely programmable relays R1, R2 (18 functions)
• Relay READY
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA,
  or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical stop ends
• Mechanical connection – flange ISO 5211
• Manual control

Additional equipment of actuator with DMS3

• Local control for actuators with DMS3 system
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU

Príspevok Electric part-turn actuator SPR 2.3 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

SPR 2 PA – electric part-turn actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or torque
• Adjustable switching off-torque from 50% to 100%
• Torque blocking in limit positions
• Torque blocking during the start
• 2 freely programmable relays R1, R2 (18 functions)
• Relay READY
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA,
  or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical stop ends
• Mechanical connection – flange ISO 5211
• Manual control

Additional equipment of actuator with DMS3

• Local control for actuators with DMS3 system
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU

Príspevok Electric part-turn actuator SPR 2 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

SP MIKRO – electric part-turn actuator

Standard equipment

• Supply voltage 24 V AC
• Electrical cable connection
• 2 position switches
• Mechanical connection ISO 5211 – flange F04

Additional equipment

• Supply voltage 220/230 V AC, 24 V DC
• 2 additional position switches
• Transmitter:
  – potentiometer: 1×100 Ω, 1×1000 Ω, 1×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)

Príspevok Electric part-turn actuator SP MIKRO zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ST 2-A – electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 2 position switches
• 2 additional position switches
• Mechanical connection – pillar
• Mechanical position indicator
• Manual control

Additional equipment

• Supply voltage 220 V AC, 3×400 V AC, 3×380 V AC
• Reverse contactors
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Space heater with thermal switch

Documents for download

• General conditions
• Technical data sheet

Príspevok Electric linear actuator ST 2-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ST 1-A – electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 2 position switches
• 2 additional position switches
• Mechanical connection – flange
• Manual control
• Mechanical position indicator

Additional equipment

• Supply voltage 220 V AC, 3×400 V AC, 3×380 V AC
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Space heater with thermal switch

Documents for download

• General conditions
• Technical data sheet

Príspevok Electric linear actuator ST 1-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 2 PA – electric linear actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Adjustable switching-off thrust from 50% to 100%
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive  (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical position indicator
• Mechanical connection – pillar
• Manual control

Additional equipment of actuator with DMS3

• Supply voltage 3×400, 3×380, 240, 220, 120, 24 V AC
• Additional relays R3, R4, R5
• Local control
• Version with stand, lever and pull-rod

Príspevok Electric linear actuator STR 2 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 1 PA – Electric linear actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Adjustable switching-off thrust from 50% to 100%
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2 (position, thrust…)
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical connection – pillars and flange
• Mechanical position indicator
• Manual control
• Protection code IP 67

Additional equipment of actuator with DMS3

• Supply voltage 3×400, 3×380, 240, 220, 120, 24 V AC
• Additional relays R3, R4, R5
• Local control

Príspevok Electric linear actuator STR 1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ST 0.1-A – electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 1 position switch
• 2 additional position switches
• Mechanical connection – flange and 4 pillars
• Mechanical position indicator
• Space heater with thermal switch
• Manual control with permanent standby

Additional equipment

• Supply voltage 220 V AC, 3×400 V AC, 3×380 V AC
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)

Documents for download

• General conditions
• Technical data sheet

Príspevok Electric linear actuator ST 0.1-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 0.1 PA – electric linear actuator

Standard equipment and functions

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2 (position, thrust…)
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive  (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical connection – pillar
• Mechanical position indicator
• Manual control
• Protection code IP 67

Additional equipment

• Supply voltage 220 V AC, 24 V AC
• Mechanical connection – flange
• Additional relays
• Local control

Príspevok Electric linear actuator STR 0.1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.