ULR 2 PA – electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting a PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage 220 V, 3×380 V, 3×400 V, 120 V/60 Hz, 110 V/60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Mechanical connection according to ISO 5210 – flange size F07
• Mechanical connection according to ISO 5210 – flange size F10
• Enclosure protection IP 68

Príspevok Electric linear actuator ULR 2 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ULR 1 PA – electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting a PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage 220 V, 3×380 V, 3×400 V, 120 V/60 Hz, 110 V/60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Mechanical connection according to ISO 5210 – flange size F07 (Y/55)
• Mechanical connection according to ISO 5210 – flange size F10 (Y/70)
• Enclosure protection IP 68

Príspevok Electric linear actuator ULR 1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UP 1 – electric part-turn actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 torque switches
• 2 position switches
• 2 additional position switches
• Mechanical connection ISO 5211
• Space heater with thermal switch
• Thermal protection of motor
• Local position indicator
• Manual control

Additional equipment

• Supply voltage 3×400 V AC
• Connector connection
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Gold coated microswitch contacts
• Electric local control

Príspevok Electric part-turn actuator UP 1 zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UP 2.5 – electric part-turn actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 torque switches
• 2 position switches
• 2 additional position switches
• Mechanical connection ISO 5211
• Space heater with thermal switch
• Thermal protection of motor
• Local position indicator
• Manual control

Additional equipment

• Supply voltage 3×400 V AC, 110 V AC/60 Hz, 120 V AC/60 Hz
• Connector connection
• Reverse unit
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Gold coated microswitch contacts
• Electric local control

Príspevok Electric part-turn actuator UP 2.5 zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UP 2.4 – electric part-turn actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 torque switches
• 2 position switches
• 2 additional position switches
• Mechanical connection ISO 5211
• Space heater with thermal switch
• Thermal protection of motor
• Local position indicator
• Manual control

Additional equipment

• Supply voltage 3×400 V AC, 110 V AC/60 Hz, 120 V AC/60 Hz
• Connector connection
• Reverse unit
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Gold coated microswitch contacts
• Electric local control

Documents for downloads

• General conditions
• Technical data sheet
• Installation instructions

Príspevok Electric part-turn actuator UP 2.4 zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UP 2 – electric part-turn actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 torque switches
• 2 position switches
• 2 additional position switches
• Mechanical connection ISO 5211
• Space heater with thermal switch
• Thermal protection of motor
• Local position indicator
• Manual control

Additional equipment

• Supply voltage 3×400 V AC, 110 V AC/60 Hz, 120 V AC/60 Hz
• Connector connection
• Reverse unit
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)
• Gold coated microswitch contacts
• Electric local control

Documents for downloads

• General conditions
• Technical data sheet
• Installation instructions

Príspevok Electric part-turn actuator UP 2 zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UL 2-A – electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 2 position switches
• 2 additional position switches
• Space heater with thermal switch
• Mechanical connection – pillars
• Manual control
• Mechanical position indicator

Additional equipment

• Supply voltage 3×400 V AC
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)

Documents for download

• General conditions

Príspevok Electric linear actuator UL 2-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UL 1-A – electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 2 position switches
• 2 additional position switches
• Space heater with thermal switch
• Mechanical connection – pillars
• Manual control
• Mechanical position indicator

Additional equipment

• Supply voltage 3×400 V AC
• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – CPT (capacitive) 4 – 20 mA, (passive/active)

Documents for download

• General conditions

Príspevok Electric linear actuator UL 1-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

UL 0-A – Electric linear actuator

Standard equipment

• Supply voltage 230 V AC
• Terminal board connection
• 2 thrust switches
• 2 position switches
• 2 additional position switches
• Space heater with thermal switch
• Mechanical connection – pillars
• Manual control
• Mechanical position indicator

Additional equipment

• Transmitter:
  – potentiometer: 1×100 Ω, 1×2000 Ω, 2×100 Ω, 2×2000 Ω
  – electronic position transmitter 0/4 – 20 mA, (passive/active)
  – DCPT transmitter 4 – 20 mA, (passive/active)

Documents for download

• General conditions

Príspevok Electric linear actuator UL 0-A zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ULR 2 PA-Ex – explosion-proof electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage:
  • 230 V / 50 Hz
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting by PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage:
  • 3×400 V, 3×380 V, 220 V / 50 Hz
  • 120 V, 110 V / 60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Terminal box with type of protection “e”
• Cable glands for armoured cables
• Mechanical connection – flange
• Mechanical connection according to ISO 5210 – flange size F07
• Mechanical connection according to ISO 5210 – flange size F10
• Enclosure protection IP 68

Príspevok Explosion-proof electric linear actuator ULR 2 PA-Ex zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.