ULR 2 PA – electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting a PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage 220 V, 3×380 V, 3×400 V, 120 V/60 Hz, 110 V/60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Mechanical connection according to ISO 5210 – flange size F07
• Mechanical connection according to ISO 5210 – flange size F10
• Enclosure protection IP 68

Príspevok Electric linear actuator ULR 2 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ULR 1 PA – electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting a PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage 220 V, 3×380 V, 3×400 V, 120 V/60 Hz, 110 V/60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Mechanical connection according to ISO 5210 – flange size F07 (Y/55)
• Mechanical connection according to ISO 5210 – flange size F10 (Y/70)
• Enclosure protection IP 68

Príspevok Electric linear actuator ULR 1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

MTN – electric linear actuator

Usage

Electric linear actuator MTN can be used even for other devices for which they are in respect of their characteristics and parameters suitable. In some special cases, the contemplated use of the actuators should be consulted with the manufacturer.

Description

The MODACT^® MTN actuators are used for remote two-position or three-position control of the valves by a reverse rectilinear motion. The MODACT^® MTN CONTROL actuators are fitted with an electronic position controller. In association with the valve exhibiting a suitable control characteristic, they form a position servo-loop. The output pull-rod of these actuators is automatically brought into a position corresponding to the input signal value of the controller.

Documents for download

• Catalog
• Installation instructions
• Addition to installation instructions

Príspevok Electric linear actuator MTN zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

MTR 3 PA-Ex – explosion-proof electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage 3×400 V AC
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 7 freely programmable relays R1, R2, RE1 … RE5 (Not valid for Profibus and Modbus)
• 2 relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting by PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage:
  • 3×380 V, 230 V, 220 V / 50 Hz
• ​Local control for actuators with DMS 3 system
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Mechanical connection – flange

Príspevok Explosion-proof electric linear actuator MTR 3 PA-Ex zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ULR 2 PA-Ex – explosion-proof electric linear actuator

Standard equipment and functions with DMS3 control unit

• Supply voltage:
  • 230 V / 50 Hz
• Terminal board connection
• Protection of the electromotor against overheating
• Switching off in limit positions from position and from thrust
• Adjustable switching-off thrust from 50% to 100%
• Thrust blocking in limit positions
• Thrust blocking during the start
• 2 freely programmable relays R1, R2 (Not valid for Profibus and Modbus)
• Relay READY (Not valid for Profibus and Modbus)
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (Not valid for Profibus and Modbus)
• Control by permanent voltage (+24 V DC) – OPEN, CLOSE
• Impulse control (inching duty) (+24 V DC) – OPEN, STOP, CLOSE
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4 to 20 mA passive (not for DMS3 in 2P version) (Not valid for Profibus and Modbus)
• Auxiliary voltage output 24 V AC, max. 40 mA for supply of the control inputs
• Output of failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameterization setting by PC
• Mechanical connection – pillars
• Manual control
• Enclosure protection IP 66

Additional equipment

• Supply voltage:
  • 3×400 V, 3×380 V, 220 V / 50 Hz
  • 120 V, 110 V / 60 Hz
• Local control for actuators with DMS 3 system
• Reversing unit for 3-phase supply voltage
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU
• Communication cable DB-9F/RJ45
• Terminal box with type of protection “e”
• Cable glands for armoured cables
• Mechanical connection – flange
• Mechanical connection according to ISO 5210 – flange size F07
• Mechanical connection according to ISO 5210 – flange size F10
• Enclosure protection IP 68

Príspevok Explosion-proof electric linear actuator ULR 2 PA-Ex zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

MTR 3 PA – electric linear actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 3×400 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Adjustable switching-off thrust from 50% to 100%
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 7 freely programmable relays R1, R2, RE1, … RE5
• Relay READY
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical connection – pillar
• Manual control

Additional equipment of actuator with DMS3

• Local control for actuators with DMS3 system
• Version with control board PROFIBUS DP V0/V1
• Version with control board Modbus RTU
• Protection enclosure IP 67

Príspevok Electric linear actuator MTR 3 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 2 PA – electric linear actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Adjustable switching-off thrust from 50% to 100%
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive  (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical position indicator
• Mechanical connection – pillar
• Manual control

Additional equipment of actuator with DMS3

• Supply voltage 3×400, 3×380, 240, 220, 120, 24 V AC
• Additional relays R3, R4, R5
• Local control
• Version with stand, lever and pull-rod

Príspevok Electric linear actuator STR 2 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 1 PA – Electric linear actuator

Standard equipment and functions of the actuators with DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Adjustable switching-off thrust from 50% to 100%
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2 (position, thrust…)
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical connection – pillars and flange
• Mechanical position indicator
• Manual control
• Protection code IP 67

Additional equipment of actuator with DMS3

• Supply voltage 3×400, 3×380, 240, 220, 120, 24 V AC
• Additional relays R3, R4, R5
• Local control

Príspevok Electric linear actuator STR 1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

ULR 1 PA-Ex – explosion-proof electric linear actuator

Standard equipment and functions DMS3

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or torque
• Adjustable switching-off torque  from 60% to 100%
• Torque blocking in limit positions
• Torque blocking during the start
• 2 freely programmable relays R1, R2 (18 functions)
• Relay READY
• Control by unified signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC
• Impulse control
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• LED position indicator
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical stop ends
• Mechanical connection – flange ISO 5211
• Manual control

Additional equipment

• Local control for actuators with DMS3 system
• Additional relays RE3, RE4, RE5
• Additional relay module RE1, RE2, RE3, RE4, RE5, READY
• Version with control board PROFIBUS DP V0/V1
• Version with control board MODBUS RTU

Príspevok Explosion-proof electric linear actuator ULR 1 PA-Ex zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.

STR 0.1 PA – electric linear actuator

Standard equipment and functions

• Supply voltage 230 V AC
• Terminal board connection
• Protection of the motor against overheating
• Switching off in limit positions from the position or thrust
• Torque (thrust) blocking in limit positions
• Torque (thrust) blocking during the start
• 2 freely programmable relays RE1, RE2 (position, thrust…)
• Relay READY
• Control by unified  signal 0/4 – 20 mA, 4 – 12 mA, 12 – 20 mA, or 0/2 – 10 V (not for DMS3 in 2P version)
• Control voltage for remote control 24 V DC (Open-Stop-Close)
• Impulse control (inching duty)
• Timing mode / regime of operation
• Safety function ESD (failure reaction)
• Electronic position transmitter 4-20 mA passive  (not for DMS3 in 2P version)
• Auxiliary voltage output 24 V DC, max. 40 mA for supply of the control inputs
• Output for failure messages
• Space heater operated by control unit
• Communication interface RS 232
• Programme for parameters setting by PC
• Mechanical connection – pillar
• Mechanical position indicator
• Manual control
• Protection code IP 67

Additional equipment

• Supply voltage 220 V AC, 24 V AC
• Mechanical connection – flange
• Additional relays
• Local control

Príspevok Electric linear actuator STR 0.1 PA zobrazený najskôr MARVEL P.I.&T. | MARVEL-BMT | Electric actuators.