Electric multi-turn actuator MOPED

Electric multi-turn actuator MOPED

MOPED – electric multi-turn actuator

 

Usage

Electric multi-turn actuator MOPED are designed for shifting valves and/or other elements for which they are suitable with their reversible rotary motion. Other using than that for controlling valves should be discussed with the manufacturer. The actuators can operate in circuits of remote control. The actuators can also operate in circuits of automatic regulation with the regime S4 – 25 %; 1200 h-1.

Description

Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.

The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.

The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.

Documents for download

This post is also available in: Slovak Russian

Additional information

Type

Type number

Switching-off torque

Operating speed

Number of revolutions

Ambient temperature

Protection enclosure

Operating position

Weight

Categories: , ,